Screed is a layer of cement mixed with sand over a concrete substrate, onto which various types of flooring can be laid. Screed provides long-term solidity in your floors and is widely used in commercial, domestic, and outdoor use.
The screeds primary purpose, using one part cement to three to five parts sharp sand, is to give a smooth and level floor on which to lay your chosen floor finish. The thickness of the screed allows it to take up normal variations in flatness and levelness of the base on which it is laid.
What Is Concrete Screed Machine. The concrete screed machine is used for leveling concrete surfaces. It use either gasoline, electricity or hydraulics to drive a vibrating motor on the screed plate. The vibrating motor creates vibrations that help to bring the cement paste to the surface and apply it evenly.
The Floor Master Robot was designed to eliminate the most often complaints in laying of cement sand and concrete screeds i.e. shrinkage cracks, cupping effect at the expansion joints and corners, too low compressive and shear strength. Work with the machine allows an operator to avoid many occupational diseases such as osteoarthritis of the knee, degenerative spine disease, osteoarthritis of the hips etc.
Owing to the specially designed and patented head, the floor screed machine compacts the floor to a depth of up to 5 cm, which ensures the optimum use of dispersed reinforcement and steel mesh, eliminating shrinkage cracks. Vibrating the semi-dry concrete mix also increases the compressive and shear strength. An advantage of such a designed machine is first of all the possibility of comfortable and precise making of floors and reduction of manual work to minimum, and thus elimination of the problems being the reasons for claims.
The machine works with sand/material between 1-16 mm. The material has to be semi-dry. The machine is simple to work with and easy to maintain. One person is enough to operate the machine. At the beginning the laser has to be calibrated and after that we only have to take care of right amount of material.
Floor Master Robot maximum performance is up to 100 square meters per hour during continuous operation. Changing the speed of the machine is very simple. The machine automatically holds the level with a tolerance of 1 mm on 10-20 meters. The machine can also make slopes of up to 3-4%.
#screed #construction #renovation #screeding #concrete #flooring #interiordesign #plastering #builders #groundworks #rendering #foundation #garagepads #basements #patios #homes #floortoppings #basmentpads #liquidscreed #yyccontractor #garages #underfloorheating #calgary #calgaryconstruction #yyc #concreting #calgarycontractor #extensions #commercialbuilders #contractor
Comments
Post a Comment