Wiha 2831112 Bit slimBit electric Phillips PH2 x 75 mm for low-lying screws, all-rounder for electricians
To reach low-lying screws, the blade diameter is often too large in conventional electric screwdrivers. Because removing insulation is not permitted and also compromises the user's safety, protective insulation has been integrated into the blade with the Wiha slimTECHNOLOGY. This has been specially developed for electrical applications, thereby ensuring blades up to 33% slimmer. This means low-lying screw and spring elements can also be easily reached with the slimBits. The insulated slimBits undergo individual piece testing as per the international IEC 60900 standard, providing users with a tool to work safely on live parts up to 1,000 V AC. 6 mm slimBits only to be used in the slimVario bit holder and slimTorque VDE bit holder.
To reach low-lying screws, the blade diameter is often too large in conventional electric screwdrivers.
Because removing insulation is not permitted and also compromises the user’s safety, protective insulation has been integrated into the blade with the Wiha slimTECHNOLOGY.
This has been specially developed for electrical applications, thereby ensuring blades up to 33% slimmer.
This means low-lying screw and spring elements can also be easily reached with the 2831 slimBits.
The insulated 2831 slimBits undergo individual piece testing as per the international IEC 60900 standard, *providing users with a tool to work safely on live parts up to 1,000 V AC.
6 mm slimBits only to be used in the slimVario® bit holder and slimTorque VDE bit holder (VDE torque system). VDE and GS tested
For work in the area of live parts up to 1,000 V AC
SlimBit Blades are 75mm long
#electrician #electrical #diy #tools #construction #electricians #plumber #worker #electricity #contractor #electric #plumbing #engineering #carpenter #tradesman #electronics #power #screw #driver #renovation #hacks #howto #amazing #best #tech
Starborn Clip and Rip Universal Hidden Deck Clip provides faster installation over traditional hidden clips. The 16 pre-assembled collated strips with stainless steel screws allow for one-pass fastening in one go saving time and money on the job site. Hidden fasteners secure your deck boards from the sides and/or below, without being visible on the top surface of the deck. Hidden fastener systems do so either via screws hidden by material-matched plugs or with clips that fit into grooves along the sides of your boards. FEATURES One-Pass Fastening: fastener can be installed in one go. The clip will remain level for sliding the next board in place Compression Tabs: “bite” down into the joists, keeps clip level after screw is completely installed Ease-of-Use: no additional tools needed. Installation is as easy as Insert, Drive, Snap! Universal Compatibility: suitable for grooved composite, PVC, and hardwood decking Time & Costs Savings: 16-clips per strip allow for installation of a f...
Comments
Post a Comment